Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working, it could be due to a dead coin-cell battery or water damage, receiver module issues, or a malfunctioning chip. These are all easy fixes that can get your car back to speed in no time!
The blade of the key can get worn out and result in an issue with your car key. This is a simple fix when you visit your local Car Key Man Auto Locksmith and let them fit an entirely new key blade for you.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not send a strong signal. This could cause the key fob to stop functioning which prevents you from opening and locking the doors or starting your engine. To fix this, you'll need to replace the battery in the key fob.
You'll have to purchase a new battery from an auto parts store or at your local hardware store. When you buy the battery, ensure that it's new and hasn't been on the shelf for too long. A brand new battery has more capacity and can transmit a stronger signal to your car.
After replacing the battery Try locking and unlocking the doors of your Peugeot by using the key fob. If G28 do not unlock, the problem is likely to be with the receiver module of your car, which can be reprogrammed by your local Peugeot dealer.
It's also possible that the key fob's internal chip has been damaged. It's possible to cause damage to your key fob when you drop it on the ground or expose it to moisture. The rubber seals that protect your chip from moisture might get worn out over time. This is especially true if you expose your key fob to water over long periods of time, like swimming it in the ocean. To avoid this from happening, it's essential to keep your key fob free from water and never let it come into contact with water.
Water Damage
If your key fob becomes submerged in water, whether you dropped it in the pool or fumbled it into a puddle, don't assume it's a lost cause. Although the key fob is equipped with rubber seals that should protect it from water, prolonged exposure to water could cause damage to the electronic chip. Water is a great conductor and any water that comes into the key fob will trigger a series short circuits, which will eventually ruin the electronic chip. After taking the batteries out, clean the contacts with isopropyl and dry them completely before putting them back in.
Your Peugeot 308 may not start because of an unresponsive battery. If you have a spare car, jumper cables can be used to get the engine going again. If the battery is the problem then it must be replaced.
A defective receiver in your car may also hinder it from receiving the signal from the keyfob. It could be a problem with the antenna or wiring or the key fob might be damaged. It may be necessary to program a new fob into your vehicle if using one. If you're unable to solve the issue, you should contact a professional technician. A trained technician will be able determine the issue quickly and fix it promptly.
Radio Interference
Interference can result in symptoms such as a key fob that isn't recognized or has a limited range. The interference can be transmitted or radiated, which is caused by power and speaker cables that are too close to electrical components. Generally, rerouting the cables or moving them further away from the components can resolve the issue.
It's unlikely that someone is watching your key fob signals to steal your car, but it's possible that your signal has been drowned out by radio frequency interference. This is a simple issue to repair.
If your key fobs that aren't being recognized, try using an entirely new battery. Also, ensure that the battery you are using is the right size and type. Batteries that are not of the correct dimensions can harm your battery.
These devices could interfere with the key signal if they are using the same radio frequency. It is advised to avoid having these devices attached to your key fob.
Pairing Issues
The remote keyless entry system has a receiver that receives radio frequency signals from the key fob. If this receiver develops problems, you won't be in a position to start your car regardless of whether the key fob works and can be modified. The issue can be caused by a number of things, including the dead battery in the coin and water damage. The receiver could also be malfunctioning due to a software error or internal damage in the key.
One of the main reasons your Peugeot 308 key fob doesn't work is that the battery inside has failed. You can easily replace this by a new battery however, it's important to get the right battery for your key fob. A bad battery can cause more problems with the key fob, therefore it is recommended to use either the original battery or a replacement that is identical in size, voltage and specifications.
Another reason that the reason why your Peugeot 308 key fob might not work is because it has been paired to a different car. This can happen if have given your key fob to a person you know or if the key has been used to unlock or start other vehicles. You can resolve this by reprogramming the key fob with an OBDII scanner. This tool will ask for details about your car, including its VIN or engine type. It is important to enter the correct details.